Construction calculators
Free tool · Construction calculators

Concrete calculator

Estimate concrete volume, ready-mix cost, and bag count for slabs, footings, columns, and stairs.

  • Imperial units · ft, in, yd³
  • Results update as you type
  • Free to use · no sign-up
01Shape
02Dimensions
ft
in
ft
in
in
slabs
ft
in
in
in
footings
in
ft
in
columns
steps
ft
in
in
in
ft
in
03Order settings
Waste factor
Bag size
$per yd³
Your estimateSlab · 20′ × 10′ × 4″
Concrete to order
2.59yd³
70.0 ft³ in total, including 5% waste
Base volume2.47 yd³
Waste · 5%+ 0.12 yd³
Volume to order2.59 yd³
Bags needed15660 lb premix bags
Ready-mix cost$454Delivered at $175 / yd³
How it’s calculated
volume = L × W × T × quantity
order  = volume × (1 + waste)
yd³    = ft³ ÷ 27

Bag count rounds up to whole bags, using the yield of the bag size you pick.

From takeoff to budget

Turn this pour into a budget line.

In Buildend, takeoff quantities carry into the project budget against the right cost code, so the concrete you order stays tied to what you planned.

See how Buildend tracks takeoffs to budget
Illustrative example · not a customer account
Before you order

Estimate only. Actual concrete needs vary with subgrade prep, forming tolerances, and mix design. Confirm quantities with your ready-mix supplier before ordering.

Disclaimer

The calculators, assessments, and checklists on this page are provided by Buildend for general informational and planning purposes only. They are not a substitute for professional advice from a licensed engineer, accountant, attorney, or other qualified professional, and they should not be relied upon as the sole basis for any financial, structural, contractual, or safety-related decision.

Results are estimates based on the values you enter and standard industry formulas or assumptions. They do not account for site-specific conditions, local building codes, contract terms, material specifications, or other factors that may materially affect actual outcomes. Buildend makes no warranty, express or implied, as to the accuracy, completeness, or applicability of any result produced by these tools.

You are solely responsible for verifying all calculations, quantities, and figures with appropriate professionals — including your ready-mix supplier, structural engineer, accountant, and legal counsel — before relying on them for bidding, ordering materials, structural design, or contractual purposes.

To the fullest extent permitted by law, Buildend disclaims all liability for any loss, damage, or claim arising from the use of, or reliance on, these tools.